猪狩/日誌/2009-05-28
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
単語検索
|
最終更新
|
ヘルプ
|
ログイン
]
開始行:
[[猪狩/日誌]]&br;&br;
-研究
--PR_sample動作確認
---PRのLaunch RunsでENV ERROR
---エラーメッセージから解析
ERROR: Static run needs to complete before any config runs are launched.
Please reset this config run and complete the static run.
Upon completion you can safely re-launch this config run.
---StaticのLaunch Runsが終わってない? -> Staticのレポートを確認
---PARのWARNINGがWindowsでやった時のレポートより多い
---読み込めてないシグナルやドライバがあるらしい
WARNING:Par:288 - The signal rst_imod has no load. PAR will not attempt to route this signal.
WARNING:Par:288 - The signal en_imod has no load. PAR will not attempt to route this signal.
WARNING:Par:289 - The signal led_omod[0] has no driver. PAR will not attempt to route this signal.
WARNING:Par:289 - The signal led_omod[1] has no driver. PAR will not attempt to route this signal.
WARNING:Par:289 - The signal led_omod[2] has no driver. PAR will not attempt to route this signal.
WARNING:Par:289 - The signal led_omod[3] has no driver. PAR will not attempt to route this signal.
WARNING:Par:288 - The signal leds_macro_1_0/output2 has no load. PAR will not attempt to route this signal.
WARNING:Par:288 - The signal leds_macro_1_0/output3 has no load. PAR will not attempt to route this signal.
---projectを初めから作る -> ダメぽ
---奥山先生に診てもらった -> 最適化(Par)で信号orドライバが消えてしまっているのでは? -> DRCチェックのエラーから、ucfファイルをいじってみる -> ダメぽ
---Windowsで動いたものをサーバに持ってきて、再合成
***コメント [#j419e035]
#comment
終了行:
[[猪狩/日誌]]&br;&br;
-研究
--PR_sample動作確認
---PRのLaunch RunsでENV ERROR
---エラーメッセージから解析
ERROR: Static run needs to complete before any config runs are launched.
Please reset this config run and complete the static run.
Upon completion you can safely re-launch this config run.
---StaticのLaunch Runsが終わってない? -> Staticのレポートを確認
---PARのWARNINGがWindowsでやった時のレポートより多い
---読み込めてないシグナルやドライバがあるらしい
WARNING:Par:288 - The signal rst_imod has no load. PAR will not attempt to route this signal.
WARNING:Par:288 - The signal en_imod has no load. PAR will not attempt to route this signal.
WARNING:Par:289 - The signal led_omod[0] has no driver. PAR will not attempt to route this signal.
WARNING:Par:289 - The signal led_omod[1] has no driver. PAR will not attempt to route this signal.
WARNING:Par:289 - The signal led_omod[2] has no driver. PAR will not attempt to route this signal.
WARNING:Par:289 - The signal led_omod[3] has no driver. PAR will not attempt to route this signal.
WARNING:Par:288 - The signal leds_macro_1_0/output2 has no load. PAR will not attempt to route this signal.
WARNING:Par:288 - The signal leds_macro_1_0/output3 has no load. PAR will not attempt to route this signal.
---projectを初めから作る -> ダメぽ
---奥山先生に診てもらった -> 最適化(Par)で信号orドライバが消えてしまっているのでは? -> DRCチェックのエラーから、ucfファイルをいじってみる -> ダメぽ
---Windowsで動いたものをサーバに持ってきて、再合成
***コメント [#j419e035]
#comment
ページ名: