Achraf Ben Ahmed/Publication schedule
Title: Low latency High throughput Hybrid Photonic Network On Chip Routing and router architecture†
Last Updated Version PDF
1- Abstract: Done: July 14th
- Despite the increase of the performance by the photonic integration in the NoC interconnect, Hybrid NoC still suffers from a latency overhead mainly caused by the path reservation.
- In order to solve this issue, we propose a new path setting mechanism. The proposed scheme will separate the routing computation and the arbitration stage, which are performed conventionally in the electronic control plane.
- The electronic plane will just perform the routing computation by finding the appropriate route following LA-XY algorithm. The routing computation result will be send to the corresponding photonic switch (in the optical transmission layer).
- Another cause of the latency in the hybrid NoC, is the acknowledgements and the path teardown signal, which are performed conventionally in the electronic plane. In the proposed path setup scheme all ACKs and the path teardown signals will be generated and transmitted in optical layer.
- In order to handle the arbitration and the generation of the ACKs and the teardown, an optimized version of PHENIC photonic switch is proposed.
2- Introduction: Done: July 14th
- Semiconductor evolution
- 2D and 3D limitations.
- Evolution of the nanophotonics silicon based technology and how photonic components based on silicon can be integrated with electronic components in the same wafer. Example of such components and their characteristic will be given.
- Existing Photonic NoC architecture.
• Fully optical NoC: Advantages and disadvantages.
- Very short latency
- Minimal bandwidth
- Typical computer system communication requires small and large messages.
The E/O and O/E for small message are characterized by a power overhead.
• Hybrid photonic NoC : Advantages and disadvantages.
- High bandwidth through WDM
- Electronic network still available for small control messages
- Latency Overhead for path setting
- All resources (i.e, input port, output port and MRs for every hop used in the communication )still reserved until the end of the communication.
- small message will have to wait until the path release.
- The proposed photonic NoC will be hybrid based. With the capability of enhance and get rid of the limitations of the hybrid architecture.
3- Related work. Done July 20th
- Brief overview of fully optical NoC.
- Path setting mechanism for hybrid electro-optical NoC.
4- Photonic Hybrid NoC Path setting.By July 31th
- Processing layer.
- Electronic Control Layer (electronic router).
- Photonic Layer (Photonic switch).
4.1 A congestion aware Path setup mechanism.By July 31th
- Electronic router architecture and routing algorithm.
- Photonic switch architecture and arbitration.
5- Evaluation By August 15th
- Latency
- Throughput
- Power
- Comparison with conventional path setting mechanism
6- Conclusion
- Last Update: Achraf, July 14th